The oil and gas engineering training courses in Manama provide professionals with advanced technical knowledge and practical skills in exploration, production, and energy management to excel in the evolving petroleum industry.
Oil and Gas Engineering Courses in Bahrain
Basics of Process and Mechanical Technology (10 Days)
Blast Resistant Building Design for Oil, Gas, and Petrochemical Plants
Mini-Master in Petroleum Sector
Liquefied Natural Gas (LNG) Transportation
Global Management in Oil and Gas
Training Program for Oil & Gas Fields Development Projects (10 Days)
Valves, Actuators, and Control Systems in Oil & Gas Industry
API Standards: A Comprehensive Guide by the American Petroleum Institute
Techniques in Enhanced Oil Recovery (EOR)
Introduction to Petroleum Technology
Project Estimating, Planning, and Scheduling for Oil & Gas Production
The Chemical and Petrochemicals Industry: A Guide for Non-Technical Personnel
Production Planning, Scheduling, and Yield Optimization in Petroleum Refining (10 Days)
Optimizing Refinery Process Yields
Fluid Flow Control Systems for the Process Industry
Hands-On Centrifugal Pump and Valve Technology
Financial and Accounting Practices in the Oil and Gas Industry
Fluid Machinery Excellence: Operating and Maintaining Pumps, Compressors, and Turbines
Basics of Process Technology
Single-Point Mooring (SPM) System
Optimizing Pipes and Piping Systems
Process Equipment and Piping Systems: Design, Application, Failure Prevention, and Maintenance
Petroleum Industry Mini Master Program
Oil & Gas Well Performance: Impact of Damage and Stimulation
Site Inspection and Safety Audit
Urban Development for Sustainability (10 Days)
Artificial Lift Systems: Electric Submersible Pumps (ESP)
Applications of Coiled Tubing
Dynamic Simulation of Oil & Gas Reservoirs (10 Days)
Global Petroleum Management in Oil and Gas
Transient Analysis of Oil and Gas Well Tests
Maintenance of Oil and Gas Reservoir Systems
Principles of Mechanical Engineering Technology
Global Upstream Operations in Oil & Gas
Principles of Production Logging in Oil and Gas
Development and Operation of FSRU Projects (10 Days)
Flow Measurement and Custody Transfer in Oil & Gas
Open Hole and Cased Hole Analysis in the Oil and Gas Industry (10 Days)
Managing and Optimizing Mature Oil Fields
Information Requirements for CAESAR II Piping Stress Analysis
Advanced Drilling Best Practices in Oil and Gas (10 Days)
Training on Progressive Cavity Pumps (PCP) (10 Days)
Channel Design and Architecture Mastery
Advanced Management of Project Interfaces
Fluid and Phase Behavior in Petroleum Reservoirs for the Oil & Gas Industry
Key Management Skills for Oil and Gas Professionals
Maintenance and Inspection of Oil & Gas Storage Tanks (10 Days)
Stress Analysis and Design in Piping
Design, Analysis, and Management of Oil and Gas Well Integrity
LNG Trading and Market Dynamics
Managing Corrosion in Oil & Gas Exploration
5-Day Intensive Oil and Gas MBA Training Program
Design of Reinforced Concrete Structures
Wastewater Treatment in the Oil Refinery and Petrochemical Industry
Technical Safety in Oil and Gas
Fundamentals of Oil & Gas Refinery Processes, Design, and Operation
Operations and Management of Oil & Gas Marine Terminals
Planning and Control of Maintenance Work in the Oil & Gas Industry
Process Plant Equipment Integrity: Piping Inspection, Evaluation, and Repair Techniques (10 Days)
Risk and Decision Analysis in Petroleum
Ensuring CMMS Data Integrity
Advanced Compressor Systems Technology
Gas Chromatography: Troubleshooting in the Oil & Gas Industry
Developing Human Competency and Capability in the Oil and Gas Industry
Practical Aspects of Oil and Gas Well Planning and Cost Management (10 Days)
Exploration and Production in the Oil & Gas Industry
Process Simulation in Oil & Gas
Solid Transport: Hydraulic and Pneumatic Conveying Methods
Design, Application, and Operation Analysis of Gas Networks and Piping Systems (10 Days)
Practical Reservoir Engineering
Steam Turbines, Gas Turbines, and Combined Cycle Power Plants in Power Generation
Engineering Cost Estimation
Managing LNG Fuel Bunkering and Usage on Ships
Project Management for Oil and Gas
Advanced Troubleshooting and Engineering Solutions for Refinery Plants
Causes of Deterioration in Reinforced Concrete Structures and Methods of Strengthening
Building and Inspecting Compressed Natural Gas (CNG) and LNG Stations (10 Days)
Funding Strategies for Oil, Gas, and Mining Projects
Operation and Maintenance of Hydraulic Systems in Oil & Gas
Design Calculations and Operation for Piping, Boilers, Pressure Vessels, and Rotating Equipment
Dismantling and Disposal of Abandoned Oil & Gas Production Areas (10 Days)
Structural Steel Design in the Oil and Gas Sector
Properties and Characterization of Reservoir Fluids and Rocks
Wireline Operations and Techniques in the Oil & Gas Industry
Principles, Applications, and Performance of Oil & Gas Pumps, Compressors, and Turbines
Operations and Maintenance of Propane Refrigeration Systems
Surface Production and Field Processing Facilities (10 Days)
Accounting and Performance Measurement in Oil and Gas (10 Days)
Mechanical Engineering Concepts for Non-Mechanical Engineers
Sustainable Urban Living through Innovation: The Journey to Smart Cities (10 Days)
Cost Estimation Methods for Oil & Gas Projects
Building Envelope and Construction Inspection
Process Piping Design Code: ASME B31.3
Operations and Maintenance of Oil and Gas Pipelines
Advanced HVAC Design: Efficient System Principles and Practices
Advanced Formation Evaluation in Carbonate Reservoirs
Influence of Piping Design and Analysis on Pipe Support Selection and Design (10 Days)
Mini Master in Oil & Gas and Energy Management
Best Practices and BHA Design in Oil & Gas Drilling
Management of Boiler and Steam Systems in the Oil & Gas Industry
Mini-Master in Hydrocarbon Production and Operations
Familiarization with ISM International Safety Management Code for Maritime and Offshore Oil & Gas
Flow Measurement in Oil and Gas Processing (10 Days)
Gasoline Specifications, Testing, and Technology: A Comprehensive Overview (10 Days)
Principles and Practices of Cost Engineering in the Petroleum Industry
Petroleum Industry: A to Z
Comprehensive Course in Facilities Management
Advanced Slickline Techniques for the Oil & Gas Industry (10 Days)
Asset Integrity Management (AIM) in the Petroleum Industry
Commercial Management and Financing of LNG Projects (10 Days)
Pipeline Integrity, Inspection, and Maintenance in the Oil & Gas Industry
Interface Management for Oil and Gas Projects
Gas and Steam Turbine Systems
Oil Production and Processing Facilities: Operations and Management
Chemical Engineering Process Control in the Oil & Gas Industry
Valve Technology in Oil & Gas: Selection, Operation, Maintenance, and Troubleshooting
Rig Movement and Safety Procedures Workshop
Dehydration, Sweetening, and Fractionation of Natural Gas Operations
Compressor and Pump Technology Manager (10 Days)
Materials and Welding Issues in Offshore Oil and Gas Industry
Commissioning and Testing
Protection of Power Systems
Workover and Completion Operations in Oil and Gas
Digital Oil Field Engineering: IFM, IVM, and MC
Aspen HYSYS Software (10 Days)
Gas Chromatography and Troubleshooting for Oil and Gas Applications
Process Equipment and Piping Systems: Design, Application, and Operation (10 Days)
Troubleshooting and Problem Solving in Process Plants Workshop
Oil and Gas Operations: Upstream, Midstream, and Downstream
Pump and Valve Technology for the Oil & Gas Industry
Optimization of Refinery Process Yields
Techniques for Drilling Optimization
Design and Application of Expansion Joints (10 Days)
Introduction to Offshore Pipeline Engineering
Establishing Effective Preventive and Predictive Maintenance Programs
Oil Spill Prevention, Response, and Recovery
Advanced Oil and Gas Drilling: Best Practices
Rigless Well Intervention Techniques in Oil & Gas
Industrial Instrumentation and Advanced Control Systems (10 Days)
Addressing Political Risk in the Oil and Gas Sector
Process Plant Troubleshooting and Engineering Solutions
Risk Management in Oil and Gas Projects (10 Days)
Essentials of Oil and Gas
Oil & Gas Welding: Design, Application, and Testing of Metal Properties
Corrosion Engineering in the Oil and Gas Industry
Introduction to Reservoir Engineering for Non-Specialists
Corrosion Control for Gas, Oil, and Water Systems
Process Equipment and Piping Resilience: Failure Management, Prevention, and Efficient Repair (10 Days)
Maintenance and Troubleshooting of Loading Arm Types
Introduction to Petroleum Refining and Petrochemicals for Non-Technical Personnel
Optimization of Oil and Gas Well Design and Engineering
Gas Processing and Conditioning
Petroleum Laboratory Management: Mini-Master in Oil and Gas Processes
Health, Safety, and Environmental (HSE) Management in the Petroleum Industry
The oil and gas engineering courses in Manama are designed to enhance participants’ understanding of modern energy systems, combining engineering principles with real-world applications. These courses prepare engineers, technicians, and managers to meet industry challenges through innovation, safety, and sustainable practices.
Exploration and production courses focus on reservoir engineering, drilling technologies, and field operations. Participants learn to optimize extraction techniques, manage well performance, and apply advanced technologies to maximize resource efficiency.
Processing and refining courses emphasize plant operations, process optimization, and environmental management. Attendees gain insights into refining processes, safety compliance, and the integration of clean energy solutions.
Project and safety management courses develop essential leadership and risk management skills for overseeing complex engineering projects while maintaining operational integrity and environmental responsibility.
Delivered in Manama, these training courses offer a blend of theory, simulation, and case studies, fostering technical excellence and strategic thinking. Ideal for engineers and industry professionals, the courses support career growth and sustainability within the global energy sector.
.svg "Company Logo")
