The oil and gas engineering courses in Amman provide essential knowledge and skills for professionals in the energy sector. These courses focus on exploration, drilling, production, and management in the oil and gas industry.
Oil and Gas Engineering Courses in Amman
Artificial Lift Systems: Electric Submersible Pumps (ESP)
Optimizing Refinery Process Yields
Operations and Maintenance of Oil and Gas Pipelines
Open Hole and Cased Hole Analysis in the Oil and Gas Industry (10 Days)
Gas Chromatography: Troubleshooting in the Oil & Gas Industry
Gas and Steam Turbine Systems
Gasoline Specifications, Testing, and Technology: A Comprehensive Overview (10 Days)
Introduction to Offshore Pipeline Engineering
Managing and Optimizing Mature Oil Fields
Process Plant Equipment Integrity: Piping Inspection, Evaluation, and Repair Techniques (10 Days)
Principles of Mechanical Engineering Technology
Project Management for Oil and Gas
Fluid Machinery Excellence: Operating and Maintaining Pumps, Compressors, and Turbines
Establishing Effective Preventive and Predictive Maintenance Programs
Corrosion Control for Gas, Oil, and Water Systems
Rig Movement and Safety Procedures Workshop
Urban Development for Sustainability (10 Days)
Dismantling and Disposal of Abandoned Oil & Gas Production Areas (10 Days)
Project Estimating, Planning, and Scheduling for Oil & Gas Production
Operation and Maintenance of Hydraulic Systems in Oil & Gas
Properties and Characterization of Reservoir Fluids and Rocks
Valve Technology in Oil & Gas: Selection, Operation, Maintenance, and Troubleshooting
Process Piping Design Code: ASME B31.3
Steam Turbines, Gas Turbines, and Combined Cycle Power Plants in Power Generation
Causes of Deterioration in Reinforced Concrete Structures and Methods of Strengthening
Engineering Cost Estimation
Process Equipment and Piping Resilience: Failure Management, Prevention, and Efficient Repair (10 Days)
Commercial Management and Financing of LNG Projects (10 Days)
Training on Progressive Cavity Pumps (PCP) (10 Days)
Developing Human Competency and Capability in the Oil and Gas Industry
Practical Reservoir Engineering
Solid Transport: Hydraulic and Pneumatic Conveying Methods
Maintenance and Troubleshooting of Loading Arm Types
Accounting and Performance Measurement in Oil and Gas (10 Days)
Design of Reinforced Concrete Structures
Global Management in Oil and Gas
Maintenance and Inspection of Oil & Gas Storage Tanks (10 Days)
Applications of Coiled Tubing
Optimizing Pipes and Piping Systems
Global Petroleum Management in Oil and Gas
Training Program for Oil & Gas Fields Development Projects (10 Days)
Flow Measurement in Oil and Gas Processing (10 Days)
Familiarization with ISM International Safety Management Code for Maritime and Offshore Oil & Gas
LNG Trading and Market Dynamics
Process Equipment and Piping Systems: Design, Application, and Operation (10 Days)
Funding Strategies for Oil, Gas, and Mining Projects
Petroleum Laboratory Management: Mini-Master in Oil and Gas Processes
Financial and Accounting Practices in the Oil and Gas Industry
Sustainable Urban Living through Innovation: The Journey to Smart Cities (10 Days)
Workover and Completion Operations in Oil and Gas
5-Day Intensive Oil and Gas MBA Training Program
Mini Master in Oil & Gas and Energy Management
Advanced Drilling Best Practices in Oil and Gas (10 Days)
Introduction to Petroleum Refining and Petrochemicals for Non-Technical Personnel
Development and Operation of FSRU Projects (10 Days)
Principles, Applications, and Performance of Oil & Gas Pumps, Compressors, and Turbines
Cost Estimation Methods for Oil & Gas Projects
Practical Aspects of Oil and Gas Well Planning and Cost Management (10 Days)
Optimization of Refinery Process Yields
Fluid and Phase Behavior in Petroleum Reservoirs for the Oil & Gas Industry
Process Plant Troubleshooting and Engineering Solutions
Troubleshooting and Problem Solving in Process Plants Workshop
Introduction to Petroleum Technology
Channel Design and Architecture Mastery
Basics of Process and Mechanical Technology (10 Days)
Risk Management in Oil and Gas Projects (10 Days)
Mechanical Engineering Concepts for Non-Mechanical Engineers
Advanced Management of Project Interfaces
Principles and Practices of Cost Engineering in the Petroleum Industry
Industrial Instrumentation and Advanced Control Systems (10 Days)
Management of Boiler and Steam Systems in the Oil & Gas Industry
Health, Safety, and Environmental (HSE) Management in the Petroleum Industry
Gas Chromatography and Troubleshooting for Oil and Gas Applications
Managing LNG Fuel Bunkering and Usage on Ships
Oil Production and Processing Facilities: Operations and Management
Basics of Process Technology
Blast Resistant Building Design for Oil, Gas, and Petrochemical Plants
Stress Analysis and Design in Piping
API Standards: A Comprehensive Guide by the American Petroleum Institute
Influence of Piping Design and Analysis on Pipe Support Selection and Design (10 Days)
Managing Corrosion in Oil & Gas Exploration
Process Simulation in Oil & Gas
Site Inspection and Safety Audit
Optimization of Oil and Gas Well Design and Engineering
Advanced Oil and Gas Drilling: Best Practices
Information Requirements for CAESAR II Piping Stress Analysis
Valves, Actuators, and Control Systems in Oil & Gas Industry
Design Calculations and Operation for Piping, Boilers, Pressure Vessels, and Rotating Equipment
Commissioning and Testing
Rigless Well Intervention Techniques in Oil & Gas
Exploration and Production in the Oil & Gas Industry
Digital Oil Field Engineering: IFM, IVM, and MC
Design, Application, and Operation Analysis of Gas Networks and Piping Systems (10 Days)
Interface Management for Oil and Gas Projects
Introduction to Reservoir Engineering for Non-Specialists
Advanced Compressor Systems Technology
Operations and Management of Oil & Gas Marine Terminals
Planning and Control of Maintenance Work in the Oil & Gas Industry
Single-Point Mooring (SPM) System
Petroleum Industry: A to Z
Addressing Political Risk in the Oil and Gas Sector
Aspen HYSYS Software (10 Days)
Advanced HVAC Design: Efficient System Principles and Practices
Global Upstream Operations in Oil & Gas
Comprehensive Course in Facilities Management
Techniques in Enhanced Oil Recovery (EOR)
Oil and Gas Operations: Upstream, Midstream, and Downstream
Dehydration, Sweetening, and Fractionation of Natural Gas Operations
Chemical Engineering Process Control in the Oil & Gas Industry
Structural Steel Design in the Oil and Gas Sector
Oil & Gas Well Performance: Impact of Damage and Stimulation
Techniques for Drilling Optimization
Production Planning, Scheduling, and Yield Optimization in Petroleum Refining (10 Days)
Fluid Flow Control Systems for the Process Industry
Materials and Welding Issues in Offshore Oil and Gas Industry
Design and Application of Expansion Joints (10 Days)
Protection of Power Systems
Mini-Master in Hydrocarbon Production and Operations
Technical Safety in Oil and Gas
Maintenance of Oil and Gas Reservoir Systems
Pipeline Integrity, Inspection, and Maintenance in the Oil & Gas Industry
Process Equipment and Piping Systems: Design, Application, Failure Prevention, and Maintenance
Mini-Master in Petroleum Sector
Dynamic Simulation of Oil & Gas Reservoirs (10 Days)
Oil & Gas Welding: Design, Application, and Testing of Metal Properties
Advanced Formation Evaluation in Carbonate Reservoirs
Best Practices and BHA Design in Oil & Gas Drilling
Key Management Skills for Oil and Gas Professionals
Risk and Decision Analysis in Petroleum
Transient Analysis of Oil and Gas Well Tests
Fundamentals of Oil & Gas Refinery Processes, Design, and Operation
Building Envelope and Construction Inspection
Corrosion Engineering in the Oil and Gas Industry
Pump and Valve Technology for the Oil & Gas Industry
Asset Integrity Management (AIM) in the Petroleum Industry
Flow Measurement and Custody Transfer in Oil & Gas
Building and Inspecting Compressed Natural Gas (CNG) and LNG Stations (10 Days)
Design, Analysis, and Management of Oil and Gas Well Integrity
Surface Production and Field Processing Facilities (10 Days)
Ensuring CMMS Data Integrity
Operations and Maintenance of Propane Refrigeration Systems
The Chemical and Petrochemicals Industry: A Guide for Non-Technical Personnel
Hands-On Centrifugal Pump and Valve Technology
Gas Processing and Conditioning
Essentials of Oil and Gas
Compressor and Pump Technology Manager (10 Days)
Advanced Slickline Techniques for the Oil & Gas Industry (10 Days)
Principles of Production Logging in Oil and Gas
Wireline Operations and Techniques in the Oil & Gas Industry
Liquefied Natural Gas (LNG) Transportation
Petroleum Industry Mini Master Program
Oil Spill Prevention, Response, and Recovery
Wastewater Treatment in the Oil Refinery and Petrochemical Industry
Advanced Troubleshooting and Engineering Solutions for Refinery Plants
The oil and gas engineering courses in Amman are designed for professionals looking to advance their careers in the energy and petroleum industries. These courses cover key topics such as oil exploration, drilling techniques, reservoir management, and production optimization, offering in-depth knowledge of the entire oil and gas lifecycle.
In the drilling and production courses, participants will learn about drilling operations, well design, and the technologies used in oil extraction. These courses focus on best practices for efficient drilling, safety measures, and environmental impact management.
The oil and gas management courses focus on the business and operational aspects of the industry, including project management, cost control, supply chain management, and regulatory compliance. These courses equip professionals with the tools to lead and manage oil and gas operations effectively.
Held in Amman, these courses provide practical knowledge and real-world applications, preparing participants to excel in the dynamic and ever-evolving oil and gas sector. Whether you’re an engineer, technician, or project manager, these courses will equip you with the skills needed to succeed in this high-demand industry.
.svg "Company Logo")
